I'm looking for a bias bar pedal box if anyone has one lying around before I purchase new? Something like the Compbrake or OBP versions with a cable clutch.

If someone even had the brake pedal on it's own twin cylinders and a bias bar I'd also be interested.

Cheers.

would something like that not allow you to convert your own setup Paul?

https://www.ebay.co.uk/itm/Brake-Balance-Bar-Tube-Brake-Bias-Pedal-Box-RACE-RALLY-NEXT-DAY-DELIVERY/272898446794?hash=item3f8a03d5ca:g:tFMAAOSwPpZZ7cP V

Unfortunately not on the new car Iain! It's got fixed pedals with the brake pedal having no way of accepting a bias bar without some engineering. I'd rather just do it right and either fit a new brake pedal or ideally a full pedal box (but that means cutting out the old pedal mounts etc....

At Shelsea a couple of months ago there was a turbo charged TR8, he made a stand off bracket that bolted to the front of the servo with a pair of master cylinders running the rod out of the servo to a bais balance bar.

Has to be much easier than chopping out the pedal assembly.

Cheers for the tip, just looked up and something like this would maybe work and would be a lot simpler to install... Food for thought!

https://www.ebay.co.uk/itm/Universal-Brake-Bias-Pedal-Box-Kit-Rally-Race-Car-OE026KIT/372386747387?hash=item56b3fad3fb:g:egEAAOSwtItbYCnE

I have a obp brake pedal with bias adjuster and twin cylinders. Its tatty and bit bent. Can be cleaned and fettled up .was badly fitted by an ape but never used. £40 includes post to mainland U.K. Can send picture to whatsap. Phil 07957617548 .

quote:

---

Originally posted by phil clegg
I have a obp brake pedal with bias adjuster and twin cylinders. Its tatty and bit bent. Can be cleaned and fettled up .was badly fitted by an ape but never used. £40 includes post to mainland U.K. Can send picture to whatsap. Phil 07957617548 .

---