Hi all, a bit off topic, but I thought it worth mentioning on here anyway.

My company is looking to recruit some additional engineers to our team. There are 2 positions available;

1. Aerospace Design Engineer - Siemens NX 3D cad preferred but similar (Solidworks, Catia, Pro/Engineer) considered. Must be capable of progressing designs from concept through to final schemes and detail drawing. Degree in Mechanical / Aerospace Engineering or similar experience required.

2. Stress Analysis Engineer - Experience finite element analysis using Nastran software and be capabale of producing all supporting calculations presentations and reports. Degree in Mechanical / Aerospace Engineering or similar experience required.

Company is based in a rural location on Surrey/Sussex border so own transportation needed.

If you or anyone you know is looking for something like this please feel free to message me.

Regards, Chris

quote:

---

Originally posted by HomersDouble
Hi all, a bit off topic, but I thought it worth mentioning on here anyway.

My company is looking to recruit some additional engineers to our team. There are 2 positions available;

1. Aerospace Design Engineer - Siemens NX 3D cad preferred but similar (Solidworks, Catia, Pro/Engineer) considered. Must be capable of progressing designs from concept through to final schemes and detail drawing. Degree in Mechanical / Aerospace Engineering or similar experience required.

2. Stress Analysis Engineer - Experience finite element analysis using Nastran software and be capabale of producing all supporting calculations presentations and reports. Degree in Mechanical / Aerospace Engineering or similar experience required.

Company is based in a rural location on Surrey/Sussex border so own transportation needed.

If you or anyone you know is looking for something like this please feel free to message me.

Regards, Chris

---

Sorry should have said..........

Both positions could be either - we are looking to fill as permanent positions but would equally welcome interest from suitable contractors.

Dan - afraid the design position would only really suit a mechanical engineer.

Chris

I'm a mechanical engineer with experience of solidworks and inventor, and in west sussex but i'm currently on my uni work placement

What company is it?

[Edited on 18/9/12 by vanepico]