Nurburg2006
|
| posted on 6/8/11 at 08:11 AM |
|
|
Digi dash
Hi guys just fitting my acewell dash does anyone no the best way to fit the speedo magnet+sensor? Also does anyone have a spare int mirror or no where
the best place to get one cheers Chris
[Edited on 6/8/11 by Nurburg2006]
|
|
|
|
|
russbost
|
| posted on 6/8/11 at 08:59 AM |
|
|
If you have to go for IVA I would suggest magnet on propshaft & sensor on either gearbox or diff wherever easiest to mount as this will give
perfect readings on their rolling road. If you don't need IVA then I would suggest magnet on driveshaft (assuming independant rear end) as
it's easier to mount, will work perfectly on the road but can give probs reading on their rolling roads as they don't lock rollers
together. If you have the barrel type plastic sensor then make sure the magnet is going to run along one of the lines cast into the plastic towards
each end of the barrel section - it must NOT run down the length of the barrel & pass across both lines as this will give you some very strange
readings!!
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
spiderman01980
|
| posted on 6/8/11 at 10:40 AM |
|
|
i read somewhere that if mount the sensor to the front wheel(like caterham does) theres no way of testing it so the iva have to pass it, is that true?
|
|
|
Nurburg2006
|
| posted on 6/8/11 at 01:30 PM |
|
|
Digi dash magnet
Does anyone have any pictures of there magnet mounted please?
|
|
|
spiderman01980
|
| posted on 6/8/11 at 01:33 PM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=156699
|
|
|
Nurburg2006
|
| posted on 6/8/11 at 01:55 PM |
|
|
Digi dash
Can I tap into the prop or will it put it out of balance?
|
|
|
SimH
|
| posted on 13/8/11 at 03:13 PM |
|
|
My speed sensor was on the prop but the speed readout fluctuated wildly, as did the gear indicator.
I changed to the front wheel (made a simple bracket for the sensor) and it now reads perfect every time.
MNR Vortx RT
|
|
|
