greggors84
|
| posted on 24/2/09 at 06:35 PM |
|
|
13" x 7" Steel wheels
I want some cheap steelie for mounting some trackday slicks on.
They need to be 13" diameter and and least 7" wide. Can anyone think of where I might be able to get these from? Ive had a look on ebay
but not much has come up. Just loads of minilites in mini fitament.
Also need to be 108 PCD so Ford, Honda or Peugeot i think.
|
|
|
|
|
Paul TigerB6
|
| posted on 24/2/09 at 06:52 PM |
|
|
I wouldnt have thought 13 x 7 steel wheels would be too common myself. Maybe better to look for some cheap alloys.
They need to be 7" for the slicks you have planned then? Many have picked up a set of 13 x 6 capri RS alloys for not much money. Am sure there
are 7" versions out there too - am sure 001Ben got the 7" ones for his car (fitted 205/60/13 tyres to them for the rear)
6 or 7" - not sure but its stamped on the wheel spokes
[Edited on 24/2/09 by Paul TigerB6]
|
|
|
trextr7monkey
|
| posted on 24/2/09 at 07:01 PM |
|
|
Keep an eye out for 8 spoke Wellers- they made them in all sorts of sizes and come through on ebay frequently. I picked up some with tyres on once
that were about 10" wide
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
|
Simon
|
| posted on 24/2/09 at 08:11 PM |
|
|
I was going to suggest Weller too.
ATB
Simon
|
|
|
short track 123
|
| posted on 24/2/09 at 08:58 PM |
|
|
New wellers are not to costly.......
Shorttrack MotorSport Ltd
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
greggors84
|
| posted on 24/2/09 at 10:19 PM |
|
|
Ahh didnt think about Wellers.
I Know a few FFord racers that might have some old ones lying about.
Chris
The Magnificent 7!
|
|
|
.jpg)
