Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Peugeot 13" Alloy Wheels
whitestu

posted on 25/8/11 at 07:39 PM Reply With Quote
Peugeot 13" Alloy Wheels

Anyone got any idea if Peugeot 13" alloys will fit over Sierra front disks / rear drums?

They are factory fit ones, not aftermarket.

Stu

View User's Profile View All Posts By User U2U Member
CRAIGR
Contributor






Posts 2760
Registered 30/8/05
Location Sussex
Member Is Offline

Photo Archive Go!
Building: Built v8 striker/blade fury/ R1 westy,now zetec we

posted on 25/8/11 at 07:58 PM Reply With Quote
Long time since i've seen any 13" peugeot rims most were 14's and 15's

[Edited on 25/8/11 by CRAIGR]

View User's Profile View All Posts By User U2U Member
ssc28

posted on 25/8/11 at 08:09 PM Reply With Quote
The steel 13" peugeot ones do fit sierras with front discs and rear drums, I've used them as they were quite strong.
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 25/8/11 at 08:13 PM Reply With Quote
The factory 13" pug alloys will not clear vented sierra calipers they are a 108mm pcd put the spigot is a little larger so will not be centered by the spigot. They often have flat seated studs and not the 60 deg nuts used by ford. to top it of they have an offset of around 18mm unlike the sierra's 38mm so they will stick out an extra 20mm for a rim of the same width.

[Edited on 25/8/11 by big_wasa]

View User's Profile View All Posts By User U2U Member
whitestu

posted on 26/8/11 at 07:39 AM Reply With Quote
Thanks guys
View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.