Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Caterham parts from crash-damaged project 98 - some on ebay + MNR Again!
gmoto

posted on 30/4/13 at 02:13 AM Reply With Quote
Caterham parts from crash-damaged project 98 - some on ebay + MNR Again!

Back again getting around to sorting out all those Caterham bits I've got lying around!

Trying to make use of the ebay listing day for a decent clearout I've messed up and listed the caterham bits as 3 days along with some other car engines lying around that were just up speculatively before weighing in. (The bike bits I got up were all 7 days which was meant to be the same for the Caterham.)

Engine sold, a nose with 7 grill cone at £30, a bonnet with slight damage for the same, an axle with damaged studs on one side (or so I presume).

Also got plenty of other bits, including a roll cage with slightly bent mountings, steering wheel, minilite 13 wheels x 3, front end steering, suspension and brakes.

Happy to consider offers, or may even try and work out prices this time - trying to dedicate a day or two to getting this all sorted out!


http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=151036468192 - Axle - which seems to be a live axle? The chassis number suggestsed de-dion
http://www.ebay.co.uk/itm/151036448818 - Bonnet
http://www.ebay.co.uk/itm/151036468023 - wheel arch





Oh and yes, the MNR is back up for sale because I'm broke again!

[Edited on 1/5/13 by gmoto]

[Edited on 1/5/13 by gmoto]

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile View All Posts By User U2U Member
JC

posted on 30/4/13 at 04:24 AM Reply With Quote
Does the steering wheel fit a Sierra column? (Don't know what column a caterham has!) any pics of it please?
Thanks!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
chicade

posted on 30/4/13 at 09:52 AM Reply With Quote
Pic of the minilites? Is there a full set? Any tyres? What OCD/offset are they? Owe and rough price cheers
View User's Profile View All Posts By User U2U Member
Peteff

posted on 30/4/13 at 10:00 AM Reply With Quote
quote:
Originally posted by chicade What OCD/offset are they? Owe and rough price cheers


Are they OCD ? The front ones are balanced I think but the back have a bit of a problem





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
chicade

posted on 30/4/13 at 10:08 AM Reply With Quote
Bloody I phone! Pcd .....
View User's Profile View All Posts By User U2U Member
gmoto

posted on 30/4/13 at 10:56 AM Reply With Quote
quote:

Are they OCD ? The front ones are balanced I think but the back have a bit of a problem

As it goes, you're spot on .

I have two front wheels which are just fine.
One rear wheel which is fine and another rear wheel has gone to pieces! (literally, sadly)
(So just 3, not a full set to answer that qusetion.)

Can't find pictures of the wheels this second, will get some later.
Not sure of PCD, will see if I can measure it/if they say on them later.

Steering wheel:

Not sure on fitment, suspect you'll know more than me!

[Edited on 30/4/13 by gmoto]

View User's Profile View All Posts By User U2U Member
gmoto

posted on 30/4/13 at 06:27 PM Reply With Quote
Pictures of various bits, including what's left of the seat (though I had another one, but if I do, not sure where it is), steering rack, axle and a few other bits.
I can't see any damage to the main part of the axle.

Click for bigger pics.




I've still got to get nose cone dimensions which I forgot (will walk the dog down there in a bit.)
And forgot to get PCD - had a rather busy day! Will at least have a look at the wheels when I'm there.

View User's Profile View All Posts By User U2U Member
gmoto

posted on 30/4/13 at 10:09 PM Reply With Quote
Well didn't do so well there.
Only got one of the asked for nose cone dimensions and forgot about the wheel dimensions altogether!
Will get them tomorrow morning.

So here's a nose cone and a tape measure at various angles, for your pleasure!




[Edited on 30/4/13 by gmoto]

View User's Profile View All Posts By User U2U Member
gmoto

posted on 1/5/13 at 08:32 PM Reply With Quote
Damn, sorry; just realised forgot the wheel spacing yet again - I suck!

I actually went to get it, then my phone rang, answered that; and totally forgot about it.

A few have asked about the nose cone - letting it run on ebay as it's almost up the level people were offering for it.

View User's Profile View All Posts By User U2U Member
Jamster1233

posted on 4/5/13 at 09:25 PM Reply With Quote
hi

hi have you got a 3 bolt steering wheel boss

mine snapped !!!!!!!!!! not good ;-(

View User's Profile View All Posts By User U2U Member
hobbsy

posted on 4/5/13 at 10:58 PM Reply With Quote
U2u sent re steering wheel
View User's Profile View All Posts By User U2U Member
robinhoodman

posted on 12/5/13 at 09:18 AM Reply With Quote
u2u sent regarding front wishbones etc
View User's Profile View All Posts By User U2U Member
Dooey99

posted on 12/5/13 at 06:58 PM Reply With Quote
U2U sent regarding front calipers





Less weight more speed, more power more speed

If in doubt, give it a clout

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.