andrewturner
|
posted on 16/8/08 at 08:09 PM |
|
|
T9 Box
What is the diameter of the T9 input splines and sleeve?
|
|
|
coozer
|
posted on 16/8/08 at 08:13 PM |
|
|
1"- 23 splines, not sure about the sleeve dia, why do you ask??
|
|
andrewturner
|
posted on 16/8/08 at 08:20 PM |
|
|
I want to use a concentric slave clutch on a toyota gearbox. I have managed to find out which Mondeo clutch fits on the T9 so I need to know if the
dia's are the same. My gearbox is a 21R or W55 I think.
|
|
coozer
|
posted on 16/8/08 at 10:21 PM |
|
|
Oh me as well, I have a W58 Toyota box I'm converting to fit my new 170ST engine...
FWD box split and use the front bit as a bell housing..
My Toyota box shaft is much bigger.. I'll measure them tomorrow and hopefully post some pictures.. hic!
1972 V8 Jago
1980 Z750
|
|
stevec
|
posted on 17/8/08 at 08:22 AM |
|
|
Is this any help.?
|
|
NS Dev
|
posted on 17/8/08 at 09:43 PM |
|
|
why not use a saab release cylinder, they are cheaper!
Also, with a concentric release mech, you don't need the sleeve anymore so you can just get rid of it, that's what i did
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|