Board logo

Signature Formatting
coozer - 16/12/08 at 11:36 PM

Is it possible to make the text along the top of my blog banner BOLD or change the font??

Steve

grahamgg - 16/12/08 at 11:51 PM

Steve just read your blog, could you not use the st 170 inlet manifold. possibly respacing the carbs.
I was at Stafford this year and i saw (on a robin hood 2b ) how easy it was to respace carbs ( they were zx9 ). Might be cheaper than trying to fabricate a new one .

Graham

[Edited on 16/12/08 by grahamgg]

Pdlewis - 17/12/08 at 12:24 AM

before the text put [ b ] then after put [ / b ]

remove the spaces

Mr Whippy - 17/12/08 at 06:54 AM

you can make it any thing at all by inserting a hyperlink to a jpeg stored in your photo archive, which could be picture of some text done in word, for example

coozer - 17/12/08 at 07:59 AM

quote:
Originally posted by grahamgg
Steve just read your blog, could you not use the st 170 inlet manifold. possibly respacing the carbs.
I was at Stafford this year and i saw (on a robin hood 2b ) how easy it was to respace carbs ( they were zx9 ). Might be cheaper than trying to fabricate a new one .

Graham

[Edited on 16/12/08 by grahamgg]


Offered the carbs up to the palstic inlet and not happy with the fit. The runners on the inlet are oval and the carbs don't sit nice in the rubbers.... would rather spend 40 hours wittling a new one out from a lump of steel!!