I am after some 1/2" unf HALF nyloc nuts.

I have tried local suppliers, Namrick, Ebay, and I have looked on the net.

I am after about 20

cheers wasa

I will be going to my local nut/bolt expert on weds for a load of 1/2"UNF stuff.... I can see if he has them and get them if he does? U2U me on Tuesday evening if you still need them and I will see what I can do!

quote:

---

Originally posted by big_wasa
I am after some 1/2" unf HALF nyloc nuts.

I have tried local suppliers, Namrick, Ebay, and I have looked on the net.

I am after about 20

cheers wasa

---

cheers Tegwin.

Flak, I have a bag full of standard ones and have skimmed a few and yes they will do the job but I would sooner just have the half nuts

not sure if you can get half nuts with nyloc .

try mcgill motorsports

quote:

---

Originally posted by Volvorsport
not sure if you can get half nuts with nyloc .

try mcgill motorsports

---

http://www.locostbuilders.co.uk/viewthread.php?tid=90711

hmmm

try b&q or dixon hall

quote:

---

Originally posted by flak monkey


Get some std ones and skim them in your lathe to the thickness you need?

---

quote:

---

Originally posted by mr henderson

quote:

---

Originally posted by flak monkey


Get some std ones and skim them in your lathe to the thickness you need?

---

Lathe? That's for wimps. A locoster would get some coarse W&D and lap them down to the required thickness in a couple of days!

---

Yes they do make them. They use them on the maxi ball joints for a start.

Box of 50 for less than £8?

nice one, this site does have every answer.