Board logo

Fuel Tank & ZX12 Modified Sump
Jamesc - 1/2/14 at 08:02 PM

Hi, I've got a few items that are surplus to requirements!

1. Aluminium Fuel Tank (Around 4 Gallons) with 6 x AN-8 fittings.. foam filled with inspection bit on top, never used - £80 ono

2. Modified ZX-12 sump with baffle plate - drain plug moved to the side etc.. £100 ono

Pictures to follow!

Offers welcome.

Thanks.

Jamesc - 10/2/14 at 08:21 AM

Bump.. Any offers considered!

Badger_McLetcher - 10/2/14 at 09:07 PM

Hi, what are the dimensions of the fuel tank please?

Jamesc - 10/2/14 at 09:17 PM

Hi,

The dimensions are around 300 x 300 x 200mm high.

Hope that helps.

twybrow - 10/2/14 at 09:24 PM

I would have bitten your arm off for the sump during my build! Someone must be doing a ZX12 build at the moment...?

Badger_McLetcher - 10/2/14 at 09:58 PM

Not gonna lie, I completely misread it initially and thought it was 8 gallons... sorry! Hmmm probably a bit small for me unfortunately

Jamesc - 11/2/14 at 07:58 AM

No problem! It is quite small, which is why it's for sale.

Shame, do you need a spare sump? I'm sure someone will need one sooner or later, so it's here when they do!

Thanks, James

Trollyjack - 11/2/14 at 08:33 AM

any chance of a photo of the Tank

Jamesc - 11/2/14 at 08:41 AM

Ah yes, I did say I would, sorry..

Here's a poor one, I'll grab some more later.

sparkyj83 - 12/2/14 at 01:25 PM

Hi do you think the sump would fit a 2006 zx10r? and could you post a pic thanks

Jamesc - 12/2/14 at 01:59 PM

I'm not sure if it would fit or not to be honest, I've never seen a zx10. Maybe someone will come along with some more knowledge!

I can get you pictures tonight if required.

sparkyj83 - 12/2/14 at 02:47 PM

many thanks as my only worry is that the oil plug does sit rather low

Jamesc - 12/2/14 at 02:58 PM

Actually, does the zx10 have the oil filer as part of the sump? Because the zx12 doesn't.. The oil plug on the modified sump is off to the side so that it is not the lowest point.

I'll grab the pictures tonight anyway as I said I would

sparkyj83 - 12/2/14 at 03:02 PM

hi no oil filter is to the side , ill wait for the pics thanks again

Jamesc - 12/2/14 at 06:33 PM

Pics of the sump and baffle plate:





sparkyj83 - 12/2/14 at 06:46 PM

Thanks for the pics what year is the engine going to try and find out if it would fit .looks about right to me .

[Edited on 12/2/14 by sparkyj83]

Jamesc - 12/2/14 at 06:50 PM

No problem. Not sure what year this came off, but it fits my 2000 A1 engine.

Thanks

Jamesc - 30/5/14 at 12:05 PM

I still have this sump sitting on my shelf if anyone is in need.

Otherwise it will sit there as a spare for when I inevitably crack the one I'm using!