Board logo

Clearout sale...
Jenko - 5/10/08 at 08:17 PM

Just having a clear up of my shed, and have the following up for grabs...

Free postage on everything:

*Crossflow Pressure plate, and clutch (used, but not done much mileage) - £13

Crossflow clutch pic

*Set of Hydraulic lifters for a CVH engine - Used but in good condition - £15

Lifters

*32mm adaptor for a temp sensor (goes in line with the coolant hose) - Ideal if you are fitting Megasquirt / Fuel injection, and do not have a temp sensor - SOLD

Temp sensor adaptor

*3 switches - Washer, windscreen wiper, and Fan - SOLD

Switches

*Set of brand new ignition leads to fit ford Coil pack (electronic ignition), and the smaller size plugs (Fit's CVH, but would fit many other cars). - £15

Ignition leads

*GSXR600 Air box - Perfect for using the trumpet holes to attach a back plate for an air filter. - £15

Air box

*Megasquirt additional VR sensor cct, for use on Megasquirt when two VR sensors are required. £10

VR sensor cct


*Spare wheel bracket from a westfield -SOLD
Like this one

[Edited on 6/10/08 by Jenko]


b4ldd - 5/10/08 at 08:36 PM

U2U sent spare wheel bracket


MikeR - 5/10/08 at 11:07 PM

If the clutch / pressure plate are for the type nine then i'm interested (i know you said crossflow but you didn't say the gearbox)


CaptainJosh - 6/10/08 at 06:50 AM

U2U sent for 32mm adaptor


Jenko - 6/10/08 at 10:04 AM

quote:
Originally posted by MikeR
If the clutch / pressure plate are for the type nine then i'm interested (i know you said crossflow but you didn't say the gearbox)


U2U's replied....

Hi,

Apologies......Yes, clutch and Pressure plate were attached to a type 9....Also the pressure plate fingers are the 'wavey' type!....I remember burton describing them as that whan I bought it :-) both did around 6 k miles in the westfield....