Board logo

Springs 1.9ID 150-225lb 9"
brianthemagical - 28/5/09 at 11:05 PM

Hi peeps. I'm after some springs. 1.9 ID, 9" free length. Around 175 to 200 lb if poss, but 150-225 will be acceptable.

Thanks.

[Edited on 29/5/09 by brianthemagical]

Chippy - 28/5/09 at 11:09 PM

Hi, I have a couple of 200lb ones, brand new never fitted, make me an offer + P & P.
Cheers Ray

brianthemagical - 29/5/09 at 10:12 AM

Dhippy-U2U'd

Just to add, they need to be no longer than 9", and 1/4" under would be ideal, unfortunately 8" leaves very little room to adhust ride height, and 9" is about as long as they go.

Thanks.

SWW84 - 29/5/09 at 10:49 AM

If the springs Chippy has aren't suitable then this company seem to supply lots a kitcar companies and are good value (~£12/spring)

South Yorkshire Spings
The Ickles, Unit 5, Sheffield Road, Rotherham, S60 1BN
01709 375375

Stuart

brianthemagical - 30/5/09 at 11:01 AM

SWW84- thanks for the details, i'll put them in my address book.

200lb springs sorted thanks to Chippy

If there's any others, from 150-225, not including 200, i'm still interested.

Thanks peeps.

Snuggs - 30/5/09 at 11:59 AM

I have a pair of 1.9" x 9" x 175lb.

Good condition, Done about 5000mls.


£ 15 + post or I can take them to Newark

rusty nuts - 30/5/09 at 12:33 PM

quote:
Originally posted by Snuggs
I have a pair of 1.9" x 9" x 175lb.

Good condition, Done about 5000mls.


£ 15 + post or I can take them to Newark


2nd dibs Clive if not already taken. Will see you at Newark. Mel

Andy D - 30/5/09 at 02:58 PM

I have a pair of 9" 1.9 id 240lb... bit heavy?

Snuggs - 30/5/09 at 05:30 PM

brianthemagical U2U sent

brianthemagical - 31/5/09 at 07:01 AM

Andy D- U2Ud