Board logo

1.3 Crossflow carbs needed side or downdraft
myeates - 1/6/12 at 07:42 PM

Hi all

I've decided to return my crossflow Locost back to carburettor form

If anyone has a 32/36 DGV carb or twin weber sidedraft with manifold I may be wanting to purchase off them.

Have a microsquirt system and throttle bodies I will be sell shortly

Thanks

Mark

kipper - 2/6/12 at 09:46 AM

Hi Mark,
I have a pair of 40dcoe webbers on a manifold which came off my car,(I went to bike carbs), all jetted up for a 1720 crossflow. I am in east yorkshire but can post if needed.
Regards Denis.

myeates - 2/6/12 at 10:45 AM

Hi Dennis thanks for the reply just one quick question would it be possible for you to measure from the manifold flange to the end of the carbs? I don't want to have to cut my bonnet if I can help it. Thanks again

kipper - 2/6/12 at 11:56 AM

Hell again Mark.
The overall measuremaent is 9 inch or 230mm if you are a young whippersnapper.
they went inside the bonnet on my car which is a STM OR Aries.now.
Denis.

myeates - 2/6/12 at 12:15 PM

Thanks very much for that have sent you u2u

Thanks again