Board logo

MAF sensor recommendation
RazMan - 6/8/07 at 11:57 AM

I am gradually getting my turbo kit together but I need a MAF sensor suitable for my 1 bar boost plan. Can anyone recommend a suitable one from a tin top?

rusty - 6/8/07 at 12:31 PM

Subaru legacy or impreza they boost to that well my legacy does.

jambojeef - 6/8/07 at 12:37 PM

Fester RS Turbo

britishtrident - 6/8/07 at 01:16 PM

Use a Pierburgh not a Bosch MAF

Pierburgh are cheaper and less prone to going out of calibration


see http://tuning-diesels.com/Pierburgh/pierburgh.htm

Davey D - 6/8/07 at 02:01 PM

in the nissan tuning scene the MAF from the Z32 nissan 300ZX is used as an upgrade. has a good flow rate, and a good resolution

britishtrident - 7/8/07 at 06:41 AM

quote:
Originally posted by Davey D
in the nissan tuning scene the MAF from the Z32 nissan 300ZX is used as an upgrade. has a good flow rate, and a good resolution


That will likely be a Hitachi unit --- Rover used them on the Lucas "Hotwire" injection system used it circa 1988 the Mk1 820Sli and Montego 2 litre Efi, 216 Vitesse and some range Rovers, I think Toyota also used it.

Davey D - 7/8/07 at 10:01 AM

there is a piccy of one here:

http://cgi.ebay.co.uk/300ZX-MAF-MASS-AIR-FLOW-METER-240SX-SR20DET-Z32-RB25DET_W0QQitemZ220137914358QQihZ012QQcategoryZ10428QQssPageNameZWDVWQQrdZ1QQcm dZViewItem

they also use similar ones on subarus, and some of the skylines, although they arent as good as the Z32 ones