Frosty
|
posted on 30/7/09 at 12:35 PM |
|
|
Engine sprocket to prop flange
I have a friend doing a BEC conversion on a car and he asked where I got my prop flange adapter for my Busa. This is the component that replaces the
chain sprocket on the standard engine.
Mine came from Westfield so was sourced for me. He needs one splined to suit a GSXR1000 and ideally undrilled.
Does anyone know where they are available from?
|
|
|
matt_gsxr
|
posted on 30/7/09 at 12:47 PM |
|
|
something like a sprocket adaptor?
Try http://www.sprocket-adaptors.co.uk/
Matt
|
|
irvined
|
posted on 30/7/09 at 02:10 PM |
|
|
Second for Sprocket-adaptors.
http://irvined.blogspot.com
|
|
Frosty
|
posted on 30/7/09 at 02:23 PM |
|
|
Cheers guys
|
|
tommyab
|
posted on 30/7/09 at 02:49 PM |
|
|
Slightly different but I was trying to fit mine today - cant get the old sprocket off though as cant undo the nut. Any suggestions? 05 R1 engine.
Cheers
|
|
sucksqueezebangblow
|
posted on 30/7/09 at 04:37 PM |
|
|
You need to jam the sproket so it doesn't turn. Check your manual to see how to do it.
Better to Burnout than to Fade Away JET METAL ~ AndySparrow ©
|
|
Frosty
|
posted on 30/7/09 at 04:38 PM |
|
|
quote: Originally posted by tommyab
Slightly different but I was trying to fit mine today - cant get the old sprocket off though as cant undo the nut. Any suggestions? 05 R1 engine.
Cheers
Yes use an impact wrench with the engine in gear, other wise you just end up spinning the sprocket freely.
|
|
MK chippy
|
posted on 30/7/09 at 04:46 PM |
|
|
quote: Originally posted by Frosty
quote: Originally posted by tommyab
Slightly different but I was trying to fit mine today - cant get the old sprocket off though as cant undo the nut. Any suggestions? 05 R1 engine.
Cheers
Yes use an impact wrench with the engine in gear, other wise you just end up spinning the sprocket freely.
Seconded^^^^^^^
Done this on mine and it was off in seconds.
Dave
|
|
tommyab
|
posted on 30/7/09 at 06:31 PM |
|
|
Many thanks gents. After a couple of hours struggling with it earlier tried your suggestion and was undone in about 10 seconds !
|
|