nitram38
|
posted on 17/11/09 at 07:22 PM |
|
|
Wtd: MotaLeira 5 wheel tracking service
Anyone know of company (not kwikfit type outfits) that will be able to take their time and adjust my car properly?
I did use an old system I had but it needed calibrating and is now sold.
I just want to make sure everything is ok. It feels ok, but I want it spot on.
In the South London/ Surrey area prefered.
|
|
|
blakep82
|
posted on 17/11/09 at 07:27 PM |
|
|
5 wheel tracking?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
nitram38
|
posted on 17/11/09 at 07:33 PM |
|
|
quote: Originally posted by blakep82
5 wheel tracking?
The proper way to do it. Centre the steering wheel/rack and locking it in place.
|
|
blakep82
|
posted on 17/11/09 at 07:36 PM |
|
|
ah, right i see i thought that might have been it
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
nick205
|
posted on 17/11/09 at 07:38 PM |
|
|
Don't know of anyone round your way, but Procomp might be worth a call or AB Performance.
|
|
nitram38
|
posted on 17/11/09 at 07:43 PM |
|
|
I want to keep things local for re-checks etc
|
|
mark chandler
|
posted on 17/11/09 at 10:26 PM |
|
|
You need to look for a crash repair body shop for a proper job.
|
|
JohnN
|
posted on 17/11/09 at 10:32 PM |
|
|
Spot on - but to what?
Is there a way of calculating all the correct settings?
|
|
nitram38
|
posted on 17/11/09 at 10:41 PM |
|
|
I know exactly what I need for the settings. Not calculated but an educated guess based on other similar cars
|
|
rickys2000
|
posted on 17/11/09 at 10:50 PM |
|
|
Try ADR in Maidstone. I used them to set up my geometry and they use full blown electronic laser equipment and did all 5 wheels
|
|
nitram38
|
posted on 17/11/09 at 11:03 PM |
|
|
quote: Originally posted by rickys2000
Try ADR in Maidstone. I used them to set up my geometry and they use full blown electronic laser equipment and did all 5 wheels
Rough cost and how long?
|
|
rickys2000
|
posted on 17/11/09 at 11:06 PM |
|
|
Couple of hundred pounds roughly and about 4/5 hours to do it properly
|
|
nitram38
|
posted on 17/11/09 at 11:12 PM |
|
|
Thats not bad
|
|
ashg
|
posted on 18/11/09 at 02:21 AM |
|
|
tyre web in ashford. cost me £90 last time
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
stevebubs
|
posted on 18/11/09 at 02:40 AM |
|
|
Do PDQ do this sort of thing?
|
|
speedyxjs
|
posted on 18/11/09 at 08:34 AM |
|
|
quote: Originally posted by nitram38
quote: Originally posted by blakep82
5 wheel tracking?
The proper way to do it. Centre the steering wheel/rack and locking it in place.
Thats just 4 wheel tracking done properly
How long can i resist the temptation to drop a V8 in?
|
|
nitram38
|
posted on 18/11/09 at 08:45 AM |
|
|
I know that, but some garages just use the 2 wheel set up twice !
|
|
rickys2000
|
posted on 18/11/09 at 07:05 PM |
|
|
quote: Originally posted by rickys2000
Try ADR in Maidstone. I used them to set up my geometry and they use full blown electronic laser equipment and did all 5 wheels
Opps sorry should have read Maidenhead
|
|
jeffw
|
posted on 18/11/09 at 09:02 PM |
|
|
The places that I have seen good write-ups about are Wheels in Motion and
Centre of Gravity
Never used either and they are not close to you. The other people would be Parr who do a lot of Racing Porsche but I don't know if they would
be interested.
|
|
gazza285
|
posted on 21/11/09 at 01:32 AM |
|
|
quote: Originally posted by nitram38
I know exactly what I want for the settings. Not calculated but an educated guess based on other similar cars
EFA
Been on PistonHeads too long.
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|