orton1966
|
posted on 10/2/11 at 04:27 PM |
|
|
Elliptical Wishbone Tubing
Currently sourcing some steel for various aspects of my build. For the wishbones I intend using elliptical or at least flat-oval tubing. I’m currently
waiting for someone to get back with prices on the following sizes.
Elliptical 26.59mm x 16mm x 1.5mm
Flat Oval 1 1/4” x 5/8” x 16g (nominally 32mm x 16mm x 1.6mm)
Flat Oval 1 1/4” x 5/8” x 14g (nominally 32mm x 16mm x 2mm)
Tubing will be ERW, I’m probably going to use the 14g flat oval on the bottom’s and one of the other sizes on the top’s
To get a sensible price I will be ordering full lengths (6.1m) so if anyone wants some for there own build shout up and we’ll share the cost
|
|
|
snakebelly
|
posted on 10/2/11 at 05:55 PM |
|
|
im up for a length....oooh errr fnarr fnarr
but seriouisly, would be interested in one full length of the elliptical
[Edited on 10/2/11 by snakebelly]
|
|
simonwinn
|
posted on 10/2/11 at 06:06 PM |
|
|
too early in my project for me to say yes but would be interested to know where your getting it from.
|
|
orton1966
|
posted on 10/2/11 at 07:00 PM |
|
|
6.1m
quote: Originally posted by snakebelly
im up for a length....oooh errr fnarr fnarr
but seriouisly, would be interested in one full length of the elliptical
[Edited on 10/2/11 by snakebelly]
A Full length is 6.1m but as soon as I get a price i'll post details here
|
|
b14wrc
|
posted on 11/2/11 at 11:24 AM |
|
|
Cool, its a bit early in my build too, but interested in the details.
Rob
|
|
nitram38
|
posted on 11/2/11 at 01:14 PM |
|
|
Try ralt.co.uk they supply the tube I used on the Motaleira
|
|