TPG
|
posted on 19/5/15 at 06:45 PM |
|
|
Discovery 4 bush size RGX500211
I am identifying poly bushes suitable to replace knackered old rubber ones currently in residence.
![](/galpreviews/rear suspension bushes 2 small.jpg) ![1 bush](/gallery/rear suspension bushes 2 small.jpg) 1 bush
![](/galpreviews/rear suspension bushes 3small.jpg) ![2 bush](/gallery/rear suspension bushes 3small.jpg) 2 bush
..and they live here
![](/galpreviews/rear suspension bushes 4small.jpg) ![mount](/gallery/rear suspension bushes 4small.jpg) mount
I "THINK" that Disco 4 Rear Lower Wishbone Front Bush RGX500211 are the way to go. So, the title and reason for the post:does anyone have
access to one to measure it please? Just the basics please. I will be hopefully getting a Powerflex PFR32-410 jobbies
![](/galpreviews/powerflexPFR32-410.jpg) ![powerflex](/gallery/powerflexPFR32-410.jpg) powerflex
...not had much help from Floflex it must be said. Anyway, I can/will make a new insert to suit and /or sleeve where it fits so that isn't an
issue. If I have the size of the original bush I can check my meanderings and thoughts.
Thanks in advance.
..Which was nice..
|
|
|
mark chandler
|
posted on 19/5/15 at 07:47 PM |
|
|
Sharp tool and poly bushes lathe down very nicely, I used landrovers panhard rod bushes for my engine mounts.
|
|
TPG
|
posted on 19/5/15 at 08:26 PM |
|
|
Cheers Mark. I will be modding the bushes for sure. I just want to double check make sure there is enough of the bush to work with.
..Which was nice..
|
|