saigonij
|
posted on 30/3/07 at 06:10 PM |
|
|
best way to clean donor parts?
Hi,
whats the best way to clean all the donor parts?
Parts include, Rear DIFF, etc.
Also, is it possible to acid clean the rear hub carriers, and the caliper brackets to get them nice and clean?
|
|
|
jollygreengiant
|
posted on 30/3/07 at 06:52 PM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=9158
IS your answer. Most viewed thread Electrolisis see the light. Just read it ALL and your questions are answered.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
ProjectX
|
posted on 30/3/07 at 07:07 PM |
|
|
Electrolysissssssssss stuff is ok but to be quite honest a good degrease and a little elbow grease is the best.
Oh Mr Muscle oven cleaner works a treat for other bits. Before....
After
HTH J
|
|
blueshift
|
posted on 30/3/07 at 07:13 PM |
|
|
electrolysis is great but only any good for rusty steel (not stainless - dangerous! or ally).
for other things a combination of paraffin, stiff brushes and wire brushes is generally considered effective.
|
|
wilkingj
|
posted on 30/3/07 at 07:47 PM |
|
|
Agreed with the above.
Electrolysis is greay for rusty bits.
DO NOT USE anything with Chrome, Stainless, or nickel in it, (all in Stainless Steel)
You will produce Hexavalent Chromium, which is quite poisionous. Just stick to using a mild steel plate for the other plate.
Works very well indeed.
For gunged on oil, grease and combustion products / gum, use parrafin, diesel. or with extreme care, petrol, or paint thinners.
I have even use Mr Muscle, and other oven cleaners
What ever you use, do take care, rubber gloves, eye protection, and face / breathing masks when there is a dust hazard, ie rotary wire brushing steel
etc.
Above all... Be Safe.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
RazMan
|
posted on 30/3/07 at 11:14 PM |
|
|
For cleaning alloy engine casings I have used a B&Q hand held steam cleaner to good effect. Mind you it knackered the poor thing and I took it
back for a refund ..... after I'd finished of course
[Edited on 30-3-07 by RazMan]
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
worX
|
posted on 31/3/07 at 05:16 AM |
|
|
see my post here!
http://www.locostbuilders.co.uk/viewthread.php?tid=60366
It was a genuinely worthwhile investment of 5 minutes scrounging!
hth cheers,
Steve
|
|
saigonij
|
posted on 6/4/07 at 06:43 PM |
|
|
i have started to try the electro thing today, how long shoudl it be left "fizzing" in the solution?
|
|
locostv8
|
posted on 7/4/07 at 04:31 AM |
|
|
I have tried this method with a realy crusty chain and channel locks, works well. Most other methods of cleaning produce fumes and remove parent
metal. This only removes the oxide.
http://locostusa.com/forums/viewtopic.php?t=1650
[Edited on 7/4/07 by locostv8]
http://wrangler.rutgers.edu/gallery2/v/7slotgrille/hssss/
|
|
saigonij
|
posted on 16/4/07 at 07:12 PM |
|
|
BLIMEY!!!!
i cant believe how good the soda-crystals and car battery method is!!!
I left a caliper bracket in there all yesterday , last night and today and after washing off the crud and wire brushing it, its amazing. it looks like
it just left the factory!!!!
i cant believe how good this method is!!!
|
|