ash_hammond
|
posted on 14/10/07 at 08:46 PM |
|
|
Pinto Cam Belt
Guys,
If the cam belt was to break on a 2.0 Pinto with Standard Valves and Pistons whats the chance of no engine damage happening?
- Ash
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
|
Mole
|
posted on 14/10/07 at 08:51 PM |
|
|
It's non interference as I understand so no damage at all.
|
|
macdave69
|
posted on 14/10/07 at 08:52 PM |
|
|
I got away with it in a pinto engined rally car years ago. Best way is to whip the cam cover off and check for obvious damage, then try a new belt.
|
|
ash_hammond
|
posted on 14/10/07 at 08:55 PM |
|
|
quote: Originally posted by Mole
It's non interference as I understand so no damage at all.
Thats how i understand it
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
omega 24 v6
|
posted on 14/10/07 at 08:56 PM |
|
|
As said on a std engine it SHOULD be ok .
If it looks wrong it probably is wrong.
|
|
ash_hammond
|
posted on 14/10/07 at 08:59 PM |
|
|
It has a Piper 285 cam in it.
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
mitch2b
|
posted on 14/10/07 at 09:08 PM |
|
|
exhaust valves are probably ever so slightly bent, happened to a mate a few months ago,
but it is a 2,1 with piper 285, so the head may have been skimmed too
Mitch
|
|
jollygreengiant
|
posted on 14/10/07 at 09:13 PM |
|
|
Fit new cambelt, remove spark plugs, turn over by hand. If it turns over ok ( If a problem then remove head ) then do a compression test. If
compression test ok (If not ok then remove head ) fit plugs, smile and start engine.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
jos
|
posted on 14/10/07 at 09:14 PM |
|
|
you didn't break it on your first run did you ash?
|
|
ash_hammond
|
posted on 14/10/07 at 09:20 PM |
|
|
quote: Originally posted by jos
you didn't break it on your first run did you ash?
Jos - your suspisions are nearly correct - 3rd outing
Recovery Dad to the Resue
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
bigrich
|
posted on 14/10/07 at 09:27 PM |
|
|
Oh bugger bad news Ash should be ok though
how was it up to that point, getting used to it
PS is your u2u working . I have sent you 2 or 3 which are till unread
Rich
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
ash_hammond
|
posted on 14/10/07 at 09:39 PM |
|
|
Evening Rich
My U2U does not seem to work.
Yep i am getting used it, done 25 miles over the weekend - weather has not been great. The joiner who is doing my loft wanted a ride - managed to
scare him so things cannot be that bad
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
bigrich
|
posted on 14/10/07 at 09:53 PM |
|
|
tell me about the bl--dy weather. had all day on my own, no kids and it drizzles all day. so had to watch motorsport all afternoon instead, (maybe not
so bad after all)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
ash_hammond
|
posted on 14/10/07 at 10:03 PM |
|
|
Well i left the house at 7.30pm for a quick run over to a mates at Birley since it was dry. To find my self stranded on the Park Way next to the
Handsworth turn off.
Car is now safely back in its home - one or two cars nearly twated it
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
bigrich
|
posted on 14/10/07 at 10:05 PM |
|
|
give us a yell mate if you need a hand sorting it out.
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
ash_hammond
|
posted on 14/10/07 at 10:09 PM |
|
|
Cheers Rich will keep u you posted
.: www.mac1motorsports.co.uk | www.m1moc.com :.
|
|
DaveFJ
|
posted on 15/10/07 at 08:38 AM |
|
|
As completely standard it is non interference however I'm pretty sure that with the Piper cam they will interefere... I have a FR34 cam and have
skimmed 1mm off the head to raise CR - when i checked my valves now lift about 4mm clear of the head - I was a little worried abotu them hitting the
pistons but I seem to be OK.....
Dave
"In Support of Help the Heroes" - Always
|
|
DarrenW
|
posted on 15/10/07 at 09:42 AM |
|
|
Bad luck Ash. Was it a new belt that snapped? Have you fitted the front cover?
Ive just had a belt trashed (luckliy didnt snap) after getting gravel or similar jammed in. Cant fit the cover easily after fitting the megajolt VR
sensor.
|
|
flak monkey
|
posted on 15/10/07 at 11:37 AM |
|
|
Snapped the belt on mine with an Fr33 cam in and it didnt do any damage, but that was only at tick over. Does depend on if the head has been
skimmed.
As std there is zero chance of piston to valve contact. With some high lift cams there is.
Sera
http://www.motosera.com
|
|
david walker
|
posted on 15/10/07 at 10:02 PM |
|
|
What's tickover got to do with it?
At 900revs/min the pistons are going up and down 15 times per second!
Dave Walker, Race Engine Services - 07957 454659 or 01636 671277
|
|
:{THC}:YosamiteSam
|
posted on 16/10/07 at 02:28 AM |
|
|
if its a 2.1 it may well of been decked too - so will almost certainly foul the valves - oversized valves? will hang lower again
|
|