Looks like metals4u or somewhere else
i need about 15m, any reccomendations on a cheap supplier?
http://www.metals4u.co.uk/detail.asp?Cat_ID=49&Prd_ID=2300
Be carefull before ordering from Metals4u
I personaly found them cr*p
Some find them OK.
Check this link:
http://www.locostbuilders.co.uk/viewthread.php?tid=99495
David
parkersteel is coming out £75 + vat, cheapest so far
quote:
Originally posted by MK9R
parkersteel is coming out £75 + vat, cheapest so far
just went to order it and they don't deliver to my address Looks like metals4u or somewhere else
What grade and has it got to be sharp edged or can it have a small radius on the corners?
i might be able to get some from work, Telford. could you pick it up and whats the smallest length in one piece?
Google " steel stockholder + home town or city "
Paul G
quote:
Originally posted by Moorron
What grade and has it got to be sharp edged or can it have a small radius on the corners?
i might be able to get some from work, Telford. could you pick it up and whats the smallest length in one piece?
can you wait till this afternoon so i can see if i can take what we have? We use to stock it but have none in stock, but i have found some on the
racking and need to see if i can have it first. Should be able to cut it to the lengths shown too. I will post back here before 2pm today.
cost is minimal and should be less than half that qouted above. but let me come back by 2 pm.
Andy
quote:
Originally posted by Moorron
can you wait till this afternoon so i can see if i can take what we have? We use to stock it but have none in stock, but i have found some on the racking and need to see if i can have it first. Should be able to cut it to the lengths shown too. I will post back here before 2pm today.
cost is minimal and should be less than half that qouted above. but let me come back by 2 pm.
Andy
Hi mate, sorry but it looks like I can’t use what we have in stores. The lengths I have seen are for development parts and I can’t take any. Sorry to
mess you about, I thought I would try and help out as someone on here did the same for me a few months back but unfortunately it’s a no go.
I can tell you that we bought our stock from a place called ‘Christmas stockholders’ in Shrewsbury. We paid £11.25 for each length at 7600mm long (but
this was 6 months ago and may have risen since and we did buy large amounts). Their number is 01743 462515, they might be able to help you out.
Andy.
quote:
Originally posted by Moorron
Hi mate, sorry but it looks like I can’t use what we have in stores. The lengths I have seen are for development parts and I can’t take any. Sorry to mess you about, I thought I would try and help out as someone on here did the same for me a few months back but unfortunately it’s a no go.
I can tell you that we bought our stock from a place called ‘Christmas stockholders’ in Shrewsbury. We paid £11.25 for each length at 7600mm long (but this was 6 months ago and may have risen since and we did buy large amounts). Their number is 01743 462515, they might be able to help you out.
Andy.