Board logo

Help finding some bits
PuppiesBalls - 24/2/10 at 11:14 PM

Evening Gents,
can anybody help me out, im trying to find where i can get the following parts from

Turn buckles to adjust the length of the trailing arm.

Fuel pipe (around 8-10mm diameter)

Brake pipe & swa
ging tool (prefere to rent or even borrow one if possible)

replacement rubber boots for the drive shaft

Also my handbreak cable snapped (the short part which goes from the leaver to the balance part.

My car had a LSD when i brought it , is there any way i can find out what ratio it is?

Thanks for your help gents


Ben_Copeland - 25/2/10 at 06:01 AM

Where are you? Might help....


mad4x4 - 25/2/10 at 07:33 AM

Information like what type of Car etc might also help you ask about handbrakes and drive shaft boots.. But unless you mention what type of car they are from (or post photos) we can't be of that much asistance.

You can buy Rubber Fuel pipe from you locl factors make sure it is stamped "fuel" or you can get 8mm (ish) copper "brake" pipe from them aswell

Hello by the way and welcome

[Edited on 25/202/10 by mad4x4]


jollygreengiant - 25/2/10 at 09:49 AM

Didn't Nissan Bluebird's come with adjustable trailing arms as standard???


MikeR - 25/2/10 at 10:11 AM

mcgill motorsport (ebay and web) do turnbuckles.


PuppiesBalls - 25/2/10 at 10:54 AM

Thanks for the welcome gents
I have updated my profile with location etc ,
I will take some pics of the suspension etc tonight


Mark Allanson - 27/2/10 at 09:57 PM

quote:
Originally posted by jollygreengiant
Didn't Nissan Bluebird's come with adjustable trailing arms as standard???


Yes! Rescued attachment BluebirdTrailingArms.jpg
Rescued attachment BluebirdTrailingArms.jpg