Board logo

GKD????
antwan - 26/2/10 at 07:25 PM

Hi all,
Im in the process of buying my first 'start from scratch' kit. I have seen this manufacturer GKD. Anyone seen the kit? Been out in one? Any opinions. I do fancy the BMW powered kit. Let me know your thoughts on anything!
Thanks


franky - 26/2/10 at 07:29 PM

I've just had my chassis delivered. Anything you want to know feel free to ask or U2U.

Its good

http://www.locostbuilders.co.uk/viewthread.php?tid=130784

[Edited on 26/2/10 by franky]


antwan - 26/2/10 at 07:31 PM

Why did you decide to go down this route? What are you going to install, 6cyl, m3 hmmmmmmm


antwan - 26/2/10 at 07:34 PM

Just seen the evidence under the blanket in the garage!!!

Is it correct that if using the M3 the only components you can use from the donor are the engine/gearbox?


franky - 26/2/10 at 07:37 PM

you can't use m3 brakes(too big anyway) but everything else you can.

If its a none-evo you can use the LSD too.

I bought a set of front and rear flanges/uprights(exchange)/calipers(for exchange) and a spare none LSD diff for £200 from a breakers.

I decided to use an m3 as I got it for the right price and it saves messing about tuning zetec/duratec to get decent power and messing around with ECU's etc and all the associated costs.

[Edited on 26/2/10 by franky]

[Edited on 26/2/10 by franky]

[Edited on 26/2/10 by franky]


antwan - 26/2/10 at 07:42 PM

I feel a 500 mile round trip coming on.

I hope all goes well for you. Give it a year or so and it will have been worth every cold winter night, scraped knuckle, swearing outburst you will more than likely experience.

Good luck!


James - 26/2/10 at 07:48 PM

I've not searched the GKD website or anything.

What's it based on dimensions and suspension wise? Locost? Locost with Sierra track?

Just curious.

Cheers,
James


franky - 26/2/10 at 08:00 PM

its an evolution of the ginetta g20/27 chassis. 30mm longer than a locost I think.


ashg - 26/2/10 at 11:26 PM

have seen a couple of them now. the only reason I didn't buy one was, at the time, i couldn't afford a kit and an m3 donor.

what I will say is if you go for it get the m3 version, it just wouldn't be right with any other engine


RK - 28/2/10 at 01:56 AM

Well, judging by what I've been reading, Ash, you've done a pretty fair job with what you did choose!