Board logo

Chassis Kit or welder?
Airhead - 27/4/10 at 05:39 PM

Hi all

Just a quick poll to get you warmed up for may the 6th...

Should I buy a chassis kit from Saturn or a welder and the metal to make it myself (bearing in mind the welder will cost a bit more but it'll be there for me to use after the event...)

StevieB - 27/4/10 at 06:03 PM

I'd say welder, but there again I've also had some dealings with the guys at Saturn and can highly recommend them.

You could always buy a welder and and flat pack chassis from Saturn.

boggle - 27/4/10 at 06:07 PM

buy a chassis kit and use my welder you plum...t

handyandy - 27/4/10 at 06:40 PM

cheers StevieB for your kind words....

& cheers Boggle for a great idea

cheers
andy

Airhead - 27/4/10 at 07:46 PM

OK Saturn kit it is then.

HandyAndy are you associated with Saturn?

big_wasa - 27/4/10 at 08:43 PM

A kit if you want to get driving and a welder if you would sooner go hide in the garage whilst the crap soaps are on

Mark Allanson - 27/4/10 at 09:12 PM

Do Saturn make a kit for a MX5 donor? If not, you are better off buying 9 lengths of 25x25 from S J Andrews, a few hacksaw blades and getting on with it.

Having said that, I would definitely buy suspension brackets, not difficult to make but what a bore!

handyandy - 27/4/10 at 09:17 PM

quote:
Originally posted by Airhead
OK Saturn kit it is then.

HandyAndy are you associated with Saturn?


Hi,
Yes , I,m the one that cuts all the chassis flatpacks
But said respectfully...as i,m not a registered trader I try not to "push" the fact as I don,t want to break forum rules etc .

cheers
andy

Airhead - 28/4/10 at 07:54 AM

Ahhh cool, I know where to come if it doesn't fit together

But seriously, I emailed a few weeks back with an enquiry and haven't had a reply - could you stick a firework under whoever answers tech enquiries please? It would have been from matt(at)spiderwebdesign.co.uk

Ta

handyandy - 28/4/10 at 08:17 AM

quote:
Originally posted by Airhead
Ahhh cool, I know where to come if it doesn't fit together

But seriously, I emailed a few weeks back with an enquiry and haven't had a reply - could you stick a firework under whoever answers tech enquiries please? It would have been from matt(at)spiderwebdesign.co.uk

Ta


it,ll go together no prob
as for the email, apologies about that, we,ve had a few mails that seem to have gone adrift, been onto our website supplier.
If you send me the query i,ll get onto it for you, would you like me to U2U my email address?
cheers
andy

Airhead - 28/4/10 at 09:24 AM

That would be lovely - thanks

handyandy - 28/4/10 at 11:17 AM

quote:
Originally posted by Airhead
That would be lovely - thanks


U2U sent

cheers
andy