Board logo

Chassis build
Mking - 23/1/12 at 07:52 PM

Hi all

I am brand new to the forum and this is my first post. I have been dreaming of building a locost since the first book came out and have bought all the books since then and continued dreaming. Well, with a bit of luck, this summer may be the one when I finally get to start building. I have seen a few comments online that some of the tube dimensions in the books are inaccurate. I will probably use the Haynes Roadster book as I would like IRS so can any of you confirm which, if any tubes are wrong and if so what the correct measurements should be? I tried looking through the forum for the information but couldn't find a suitable post although I am sure it's there somewhere.

Thanks a lot and if the build starts as planned I am sure I will become a regular fixture on here as I muddle my way through building my future dream machine!

Cheers

Matt


wylliezx9r - 23/1/12 at 08:07 PM

Joins the Haynes forum, all the amendments to the book are on there. Best of luck and have fun!


Mking - 23/1/12 at 08:16 PM

Brilliant cheers.


wilkingj - 24/1/12 at 09:20 AM

Welcome to the madhouse.
No reason why you cant stay on here as well. There are lots of helpful people with a wealth of information and willing to share it with you.
The Haynes forum would be a must if you build a Haynes Roadster. But why not here as well. Have the best of both worlds!

Also could you put your approx location in your profile as it helps a lot when people offer help or parts etc.

This is one of the best forums around. I think you would find it useful to stick around here as well.

Good Luck with the build.