Board logo

Tiger erse
dave - 3/3/12 at 09:17 PM

I have been modifying the rear end of my Tiger E1 to get rid of the Sierra de dion and wishbones. I have put some pics in my archive if anyone is interested. Comments welcome.

matt_gsxr - 3/3/12 at 09:38 PM

I was expecting to see something like this



zilspeed - 3/3/12 at 10:03 PM

Gaun yersel' Dave.

snapper - 4/3/12 at 06:01 AM

I take it you will ditch the Sierra A arms and go full fabricated wishbones?
Thinking about that for my Monocoque Robin Hood rear end

scutter - 4/3/12 at 09:57 AM

Why not look into the tiger Avon rear end? Sierra based.

ATB Dan.

Minicooper - 4/3/12 at 01:16 PM

sierra de dion, I can only see the original sierra trailing arms unless that is what you have changed to?

Cheers
David

dave - 4/3/12 at 05:29 PM

Im fitting a Rorty de dion rear.

MikeRJ - 9/3/12 at 08:16 AM

quote:
Originally posted by Minicooper
sierra de dion, I can only see the original sierra trailing arms unless that is what you have changed to?

Cheers
David


The Tiger Cat used the entire (and enormous and heavy) Sierra rear subframe with semi-trailing arms AFAIK, I've never seen one with a De-Dion fitted.

dave - 7/4/12 at 08:48 PM

Petr from Czech, can you u2u me again. I deleted yours by mistake.