those of you who have my msn address for the pc that is in the garage can view live on the webcam while i work - wooooooooo
paulsimon9@hotmail.com - the garage pc
just finished cutting up all the metal for the chassis - got a nice big pile of metal with nice bloo marks on it all hehe
those of you who have my msn address for the pc that is in the garage can view live on the webcam while i work - wooooooooo
paulsimon9@hotmail.com - the garage pc
How do we see the action?
via my msn 
in time i will upload a webcam server ad an address to view freely
Photies?
TT
Sounds a bit pervie to me... 
Watchin u at work.. ahemm!
IF your missus is helping you in the garage and IF it's really warm in there(like a sauna) maby.....just maby i'll have a look at that
webcam thing
Graceland's Missus?
I wouldn't encourage him- it only casues trouble on here!
hahahaha
cheers james git
Yes it would
So where ya got to?
Hacksawing 70x70 is a grueling job!
TT
basic chassis is assembled and tack welded up ready for full welding
not bad really for oooooooo, 6 hours work
speed chassis anyone? lol
pics later
ya git i am determined i am going to beat you for a speed build, i'm gonna have to be good though as your effin dynamite
6 hours for a base chassis. ahhhhhh
hehe
lemme show a pic - one min
you 're not that quick its been 2 mins now
[Edited on 27/8/04 by liam.mccaffrey]
that is good work fella!!, i am megga busy untill a week tomorrow so i can't start but i will have three weeks free then to build a way! i am
aiming for a rolling chassis with the engine in by then maybe more who can say
p.s. 300th post woohoo
[Edited on 27/8/04 by liam.mccaffrey]
rolling chassis - best of luck for 3 weeks
lol
once the chassis on mine is fully welded that is all i can do untill i get the donor car 
arse. lol
Not bad Paul..
If ya wanan borrow a rear end with arms then let me know..
Good start though...
TT
Tell me please that you didn't use a wood cutting blade in your chopsaw to cut the metal? If you did, and survived, then please stop and go buy
a metal cutting blade to fit your saw. Metal chop saw blades and very cheap.
This is advice that could save your life, or at least an eye when one of the wood blade teeth breaks off and makes a beeline for your mincies, or,
even worse, the pills.
-Steve
sven - already had it spit a blade at me, hehe, so swapped it for an angle grinder disk - only use it for reducing full lengths and not precise cuts
quote:
Originally posted by Graceland
sven - already had it spit a blade at me, hehe, so swapped it for an angle grinder disk - only use it for reducing full lengths and not precise cuts
arrrr lad -,be reet, t'only spat blade once, metal ones are a bit't dear for my liking - 60 queens heads for a metal blade, or 10 queens
heads for a pack o' 10 grinder discs yum
I have been running 10 x 3/32 inch abrasive blades in my compound miter saw andits quite acurate although I have bee through proablably 4 blades in
the last year it seams perfectly safe.
Dale
im gonna use a 8" slitting saw blade
£15 from http://www.tracytools.com/
quote:
Originally posted by James
Graceland's Missus?
I wouldn't encourage him- it only casues trouble on here!
Don't see much of him on here these days either.
cant remember who i upset, lol, wasnt intension i know that much hehehe
cant do much more on car now untill i get the donor
They're so cheap you could get two!
One to get you started (4x4 for back end or something) and a later one for the engine you want!
Can't you do the wishbones etc. now? What about radiator mounts? Start on your roll-over bar.
Loads of bits to do!
James
EDIT: What about doing Cymtriks' mods to the nose of the chassis. You could make up the jig for your suspension brackets.
Too much to do to mention!
[Edited on 31/8/04 by James]
quote:
Originally posted by Peteff
Don't see much of him on here these days either.