If interested, I have the following parts that will help a lot that endeavor!
Ideal to design and produce an ultimate track day car!
Please, refer to the first photo, to understand the following parts list/legend:
A- Chain driven diff aluminium side supports;
B- VW Based CV joint (diff side);
C- Rubber boot;
D- Wilwood 11” vented brake disk;
E- Alloy disk bell;
F- SKF hub/wheel bearing unit (Opel/Vauxhall 4x100 PCD)
G- Upper Rear suspension arms;
H- Inboard suspension connecting rod (rear suspension);
I- Inboard suspension connecting rod (front suspension);
J- Front axle blocking bearing washers;
K- Splited sproket
L- Chain driven diff (alloy casing, with excentric adjusting system, standard VW diff inside. It is possible to use a LSD);
M- Custom made transmissions;
N- Rear upright arms;
O- Rear 7075 T6 alloy uprights (designed to use SKF unit and wildwood callipers)
P- bottom ball joint support (bolted to upright);
Q- Bottom rear suspension arms
R- Suspension bell cranks;
S- Front upper suspension arms;
T- Front bottom suspension arms;
U- Front 7075 T6 alloy uprights (designed to use SKF unit and wildwood callipers);
V- Front upright steering arms;
Will provide all info needed and will help setting up the design you need. 3D CAD data available for all parts listed.
Regards,
Ernesto Freitas