Board logo

Engine mounts?
Rena - 27/12/16 at 03:21 PM

Hi,

I need to weld up a new engine mount on the left side of the engine because I will try to fit a new exhaust manifold.

Is it possible to use the four holes (marked red) for engine mount or do I have to use one more hole (marked green)?

Where can I find a lasercutted plate?


[img][/img]

loggyboy - 27/12/16 at 03:38 PM

Any are suitable. I used those in red.
Plates were made up from blank plates and tube from ebay.

Rena - 27/12/16 at 04:17 PM

Thanks!

coozer - 27/12/16 at 04:20 PM

I used the back two red and the green one in a triangle..

Are you on Facebook? Dude near me makes plates for the stock car peeps. If your on fb let me know and I'll send you the link.

Steve

ian locostzx9rc2 - 27/12/16 at 04:25 PM

I would use the back two red ones and the green one

Rena - 27/12/16 at 04:29 PM

quote:
Originally posted by coozer
I used the back two red and the green one in a triangle..

Are you on Facebook? Dude near me makes plates for the stock car peeps. If your on fb let me know and I'll send you the link.

Steve


Yes I am, Fredrik Renå

coozer - 27/12/16 at 04:35 PM

Sent it via messenger