Board logo

Shock brackets
pmc_3 - 8/10/21 at 08:17 PM

Anyone know where I can get hold of some of these brackets either undrilled or with 7/16". Even m10 would be fine as I could drill out to the right size?

https://www.ebay.co.uk/itm/114472344824?ss PageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

The shocks I have are from a Westfield and are in good order but the bushes have 7/16 bolt holes.

Thanks in advance.

Slimy38 - 11/10/21 at 05:52 PM

Speak to Rogue Engineering, he can make up most brackets and he's a good seller;

https://www.ebay.co.uk/usr/daveo1121

Not overly expensive either, although obviously chunks of metal cost a fair bit to post.

pmc_3 - 11/10/21 at 08:28 PM

quote:
Originally posted by Slimy38
Speak to Rogue Engineering, he can make up most brackets and he's a good seller;

https://www.ebay.co.uk/usr/daveo1121

Not overly expensive either, although obviously chunks of metal cost a fair bit to post.


Thanks. I've messaged him through ebay a couple of times and had no reply.

[Edited on 11/10/21 by pmc_3]