LocostBuilders - powered by XMB

Chassis Width check?

Dick Axtell - 11/9/03 at 08:52 AM

For all "live axle" builders;

1: What is your chassis width, at the point where the rear edge of the nosecone sits?

2: What is the dimension from front chassis rail 'LC' to the nosecone rear edge?

Just need to check on my installation.
TIA

Stu16v - 11/9/03 at 05:44 PM

Dick, surely that will depend on what nosecone is being used, and how far foarward it is being mounted....?

Dick Axtell - 12/9/03 at 07:09 PM

Stu,
Precisely the reason for my asking Q2.

Dick

Mark Allanson - 12/9/03 at 07:12 PM

Q1 = Could not measure - some idiot has put an engine in the way!

Q2 = 290mm

[Edited on 12/9/03 by Mark Allanson]

Dick Axtell - 13/9/03 at 06:12 PM

Mark,

Thanks for that info. Something to work with as a comparator.