hi anyone got any pics of how the inner panels are fixed in. and how did you box the tunnel in.
adam

here's a thread to start with

http://www.locostbuilders.co.uk/viewthread.php?tid=75174

http://www.groovy42.freeserve.co.uk/mylocost.htm

My internal side panels are held in by friction (seat are tight fit), but can't come out because seatbelt bolts go through them. The trans tunnel top is bolted down. Footwell panels were glued in.

HTH

ATB

Simon

thanks all iam starting to get the idea now lol. ive bought some 4 point belts but they have clips things on them so ive gotta look at how i can fit them.

simon is your car running yet with those turbos on.
adam

Adam,

Errrr, not quite

Got to put the other fuel line, regulator and new pump on (which I'm hoping to do tomorrow. Have bits

Need to get my Emerald organised which will be soon. Turned it over earlier, just to circulate some oil.

As soon as fuel bits done, gonna do the bonnet. Should be ready by......well, this was gonna be a 6 week job starting 15/10 last year

ATB

Simon