Edit do you mean these?
[Edited on 21/7/08 by mookaloid]
Has anyone used the camber adjusters sold on Ebay? I am trying to find out if these can be used with a std pair of front wishbones? The threads in my
wishbones are a little loose and I am concerned about this and using these sleeves would mean that I could drill out the treads and at the same time
have adjustment. I have sierra hubs and suspect that I will have to change the top joints?
Just noticed these are sold by Rally Design also but suggests they are Oval?
thanks
Dave B
[Edited on 21/7/08 by Dave Bailey]
a link would be handy
Edit do you mean
these?
[Edited on 21/7/08 by mookaloid]
Yep they are the ones!
Ok you will need to make new bones. Worth doing IMHO as they make adjustment hugely easier and you can get the sdjustment spot on - not just to the
nearest thread.
Should work ok with the standard Transit draglink and Mushroom in sierra upright top joint.
Cheers
Mark
Pitty I have two packed my top wishbones.....And they look the biz!
So what diameter tubes do I need to be on the top bones?
thanks
Dave B
Not sure but here's a pic pinched from Hellfires site of the finished article
Hi Chris,
Mine didn't show any wear at all, they only move when you are actually adjusting them and the rest of the time they are locked in place with the
usual locknuts. they are a nice fit in the bones and turn easily when adjusting - I never had one move when it wasn't supposed to
From an ease of adjustment point of view they are really good, I don't know if they are available in different sizes but they would work well
with rose joints I would have thought.
Cheers
Mark
quote:
Originally posted by Dave BaileySo what diameter tubes do I need to be on the top bones?
thanks!
Mark, sorry if I have missed the point , but do you know if these can be used on standard MK Indy set up, or do I need new bones made up too, if I was
to use them?
Cheers
Craig
ahhh the magic of search, I believe that I have to get to get new top bones.
quote:
Originally posted by mookaloid
Ok you will need to make new bones. Worth doing IMHO as they make adjustment hugely easier and you can get the sdjustment spot on - not just to the nearest thread.
Should work ok with the standard Transit draglink and Mushroom in sierra upright top joint.
Cheers
Mark