Board logo

Cbr 1000 RR8 exhaust dimension
fege - 22/10/13 at 06:53 PM

I'm planning too swap my -99 carbed R1 engine för a -08 Fireblade this winter. So if anybody please could supply measurements for a good -08 Fireblade exhaust I'd be most greatful.

Also, what material is the stock Fireblade exhaust made of?

kj - 23/10/13 at 12:26 PM

Sure the fireblade has a 40mm OD

T66 - 23/10/13 at 04:51 PM

My Blackbird OEM pipes were 34mm. OD.

The manifold pipes that is ! I can measure the secondaries if that helps ? They are bigger than 34mm.

[Edited on 23/10/13 by T66]

fege - 24/10/13 at 05:11 AM

Thanks for your replies!

I've gotten old of a stock 2008 exhaust but if anyone has got measurements of an Akraopvic full system for the 2008 Fireblade it would help alot.