Board logo

SEAT FITTING QUESTION
WAYNE10 - 3/2/10 at 08:23 PM

Does anybody know what make these seats are. Also I need some ideas on what sort of frames and runners to use (need to be IVA proof) Photos would be good if anyone runs similar seats. http://i485.photobucket.com/albums/rr219/WAYNEK_PHOTOS_2008/P1010006.jpg At the moment not sure if the seat it self will be ok for the IVA?

[Edited on 3/2/10 by WAYNE10]

mangogrooveworkshop - 3/2/10 at 08:58 PM

jk composites

http://www.jkcomposites.com/


[Edited on 3-2-10 by mangogrooveworkshop]

mangogrooveworkshop - 3/2/10 at 09:14 PM

We are still waiting for them to turnup but we just bolt them hard to the floor.
some use transit sliders others use metro hope that helps
pat


quote:
Originally posted by WAYNE10
Does anybody know what make these seats are. Also I need some ideas on what sort of frames and runners to use (need to be IVA proof) Photos would be good if anyone runs similar seats. http://i485.photobucket.com/albums/rr219/WAYNEK_PHOTOS_2008/P1010006.jpg At the moment not sure if the seat it self will be ok for the IVA?

[Edited on 3/2/10 by WAYNE10]

A1 - 4/2/10 at 03:07 AM

i made some brackets from square tube aluminium then bolted them straight through the floor.

The Black Flash - 8/2/10 at 11:21 PM

If you want runners you can buy them with the seats, or seperately - they use the OMP ones you can get from demons or wherever. I bought some recently, about 25 quid I think they were. Otherwise as others have said, bolt direct to the car.

eddie99 - 8/2/10 at 11:23 PM

I had a good conversation over the phone when i ordered my seats and i got them to fit the runners to the seat so it was very simple and i knew runners/seat combo would work.

WAYNE10 - 9/2/10 at 09:28 AM

I have been in touch with jk composites and they are not there seats so I still do not know the make. It looks like the main support fixings are on the side so I think i will try and make a frame and mount that on some runners. If anyone has any pics of side mount frames that would help me a lot .
Thanks

tritonseats - 4/3/10 at 11:58 AM

quote:
Originally posted by WAYNE10
Does anybody know what make these seats are. Also I need some ideas on what sort of frames and runners to use (need to be IVA proof) Photos would be good if anyone runs similar seats. http://i485.photobucket.com/albums/rr219/WAYNEK_PHOTOS_2008/P1010006.jpg At the moment not sure if the seat it self will be ok for the IVA?

[Edited on 3/2/10 by WAYNE10]


We believe these seats are a GRP copy of Reverie's Mulsanne Seat