Board logo

Wishbone Rose Joint Sizes?
johnny chimpo - 5/3/13 at 11:15 PM

As part of my winter spruce up for my MNR, I'm looking to replace the rosé joints and poly bushes for all 8 wishbones.

I have got new poly bushes from MNR, but need to pick up rose joints. Can anyone advise what size of rosé joints I require so I don't need to take off the o,d ones and measure them?

Also is there anything else I should be looking to replace at the same time?

designer - 6/3/13 at 08:26 AM

There should be a part number stamped on them.

40inches - 6/3/13 at 08:35 AM

Is the MNR fitted with Rose Joints from the factory? If so a quick phone call will do, MNR are very approachable

Triggerhappy - 7/3/13 at 03:12 PM

quote:
Originally posted by johnny chimpo
As part of my winter spruce up for my MNR, I'm looking to replace the rosé joints and poly bushes for all 8 wishbones.

I have got new poly bushes from MNR, but need to pick up rose joints. Can anyone advise what size of rosé joints I require so I don't need to take off the o,d ones and measure them?

Also is there anything else I should be looking to replace at the same time?


http://www.mnrltd.co.uk/index2.html

Scroll down a bit on the page above.

johnny chimpo - 7/3/13 at 06:36 PM

quote:
Originally posted by Triggerhappy
quote:
Originally posted by johnny chimpo
As part of my winter spruce up for my MNR, I'm looking to replace the rosé joints and poly bushes for all 8 wishbones.

I have got new poly bushes from MNR, but need to pick up rose joints. Can anyone advise what size of rosé joints I require so I don't need to take off the o,d ones and measure them?

Also is there anything else I should be looking to replace at the same time?


http://www.mnrltd.co.uk/index2.html

Scroll down a bit on the page above.


That's just the MNR main page?