omega0684
|
| posted on 12/6/09 at 09:10 AM |
|
|
chassis question
if you make your own chassis do you have to have it tested for strength/flex etc by an external company?
|
|
|
|
|
tegwin
|
| posted on 12/6/09 at 09:12 AM |
|
|
No!
But, the SVA tester will have to be satisfied that it is strong enough and up to the job.
So take lots of pictures etc and document everything!
So that when the tester asks why you have put tube X in a specific place you know and can basically presuade the tester that you know enough shiz to
have done a proper job..
If it looks right, it usually is!
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
iank
|
| posted on 12/6/09 at 09:35 AM |
|
|
Build a balsa wood scale model of your chassis. Take the model along to the test and physically demonstrate how stiff it is to the tester if he
questions the design.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
