40inches
|
| posted on 9/10/10 at 09:18 AM |
|
|
Tube bending
I have hired a tube bender for this weekend, and have just done the last bend . So,if anyone in the area can get here and wants any tubes bending,
let me know, but be quick
I'll keep checking posts every 1/2 hour or so.
|
|
|
|
|
neo2
|
| posted on 15/10/10 at 09:06 PM |
|
|
40 inches how easy is it to use and form the bends etc, as i was going to hire one to make to side protection bars to attach to my full cage, as MK
wanted the car to do it and about £240..
|
|
|
40inches
|
| posted on 16/10/10 at 08:55 AM |
|
|
I think it depends on tube size, I was bending 19 and 16mm tube, but the bender capacity was 35mm, I found it a doddle at those sizes.
I would hire a bender that exceeds your tube size, then you know it can cope
|
|
|
neo2
|
| posted on 16/10/10 at 10:08 AM |
|
|
Cheers mine is nearer 40/45mm i think of hand..
|
|
|
