Andy_B
|
| posted on 20/10/10 at 05:19 PM |
|
|
MT75 gear stick ...STUCK
Evening all...nearly ready to remove engine and box ...but...problem 1 is the gearstick is not coming off union i have the lower pin removed ..it
should come off...mine is cetainly not !!! Problem 2 propshaft bolts are solid ...just got hold of a bigger impact gun to give it a good doing
tomorrow !!
|
|
|
|
|
big_wasa
|
| posted on 20/10/10 at 05:24 PM |
|
|
To get the bolts of the donut I just choped them of with grinder then got the impact wrench on them.
Do you mean taking the stick out of the white plastic bearing ? There is a circlip.
|
|
|
Andy_B
|
| posted on 20/10/10 at 05:27 PM |
|
|
I thought it seperated just below the hole where the pin goes through ..??
|
|
|
big_wasa
|
| posted on 20/10/10 at 05:32 PM |
|
|
Ah the top bit for the lift reverse. Its tight but pulls of.
I binned mine and turned one up on the lathe.
[Edited on 20/10/10 by big_wasa]
|
|
|
