donskye
|
| posted on 2/11/11 at 03:01 PM |
|
|
wishbones
on with making wishbones atm, but struggling to find a place that sells the threded"tube" if you like that the transit track rod end
threads into... is there such a place that makes them?? i could drill some stock i have and buy a tap and prat about making them just would prefer
buying them...
any ideas?? i will get around to posting pics guys... honest!!!
|
|
|
|
|
eddie99
|
| posted on 2/11/11 at 03:06 PM |
|
|
Have you considered camber adjusters instead?
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
donskye
|
| posted on 2/11/11 at 03:28 PM |
|
|
i havent no... not sure what is involved in that?
if you would care to elaberate... im now intreaged!!!!
|
|
|
Dick Axtell
|
| posted on 2/11/11 at 03:38 PM |
|
|
quote:
Originally posted by donskye
on with making wishbones atm...
Also have set of w/b parts to weld up. Discovered that there are slight differences in width dimension at chassis mounting end, depending on the
chassis used. What is the usual width dimension for lower w/b?
Just for reference, the "book" dimension is 343mm.
Work-in-Progress: Changed to Zetec + T9. Still trying!!
|
|
|
eddie99
|
| posted on 2/11/11 at 03:55 PM |
|
|
Camber adjusters - allow you to adjust the camber without removing the ball joint from the upright. In order to do this you use a plain tube instead
of the threaded one on the outboard end of the wishbone and then there is a threaded insert with a hex on one end that fits inside the plain tube. To
adjust camber you release the lock nut on the ball joint, twist the camber adjust until the desired camber is achieved and then tighten the locknut
again. Very simple and makes the wishbones easy to make too.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
mad4x4
|
| posted on 2/11/11 at 04:54 PM |
|
|
Try these Poeple for threaded Weld in Insets
here <-----------------
[Edited on 2/1111/11 by mad4x4]
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
donskye
|
| posted on 2/11/11 at 08:56 PM |
|
|
cheers boys ur a gr8 help!!!
|
|
|
phelpsa
|
| posted on 3/11/11 at 09:45 PM |
|
|
I would send David Flak Monkey a U2U.
|
|
|
