Tris
|
| posted on 29/10/12 at 01:27 PM |
|
|
How much is Fury Chassis & Bodywork worth ?
Hello All,
Almost at a point of selling a complete Fury Chassis and Bodywork set, as ive decided to strip my current car down for a new project rather than
selling it as a complete car. Not up for sale yet as ive got to finish stripping it down, but should be ready to advertise in a week or so.
I am trying to decide on how much i should advertise it for, could anyone give me a rough idea of what i should be asking for the following ? :-
The car is / was an RGB race car built by Chris Seaman (ex kit car workshop). Its about 5-6yrs old.
Lightened IRS chassis, with mountings for Freelander Diff. Chassis was shot blasted and repainted at the start of this year with all new ali
panelling.
Full Roll Cage
Ali Front Uprights + Disks
Light weight complete set of bodywork, with front splitter and rear diffusor (''race spec' so it does show signs of use, although
fully structurally sound)
No signs of damage to the chassis and although its never been IVA'ed, there's nothing stopping someone from stamping in a VIN number and
using it as a basis for a road car.
Here's a couple of pictures to give you an idea (picture of the chassis was taken at the start of the year before i finished all the
panelling)
Picture above was taken a few weeks ago. Had a few searches and couldn't find any recent examples being sold in this state, and hence this
post.. I do know that if i was to by the parts new from Steve@ furysportscars, i would be looking at over £4k..
Cheers
Tris
|
|
|
|
|
Wheels244
|
| posted on 29/10/12 at 02:14 PM |
|
|
I don't know what it's worth Tris - I'll leave to others to determine that.
But I could be interested depending on price.
What engine was it running ?
Thanks
Rob
|
|
|
Tris
|
| posted on 29/10/12 at 02:23 PM |
|
|
Hello Rob - it was running a CBR1000rr 999cc 2008-2009 Fireblade engine.
Cheers
Tris
|
|
|
Wheels244
|
| posted on 29/10/12 at 04:45 PM |
|
|
Thanks Tris
I have a ZX12R lump that I'm sure I could make fit.
Could you clarify what the package consists of please.
Does it come with wishbones, rear uprights etc how far are you stripping it down ?
U2U if you prefer.
Thanks
Rob
|
|
|
Tris
|
| posted on 29/10/12 at 08:04 PM |
|
|
U2U sent 
|
|
|
