omega 24 v6
|
| posted on 29/1/05 at 04:23 PM |
|
|
Its wider but fits the std nosecone
Ok if I decide to build the MC sorely 7 +442 am i right in saying a std nosecone would fit. Also fitting a capri axle which is 4" wider than an
escort. So will the front wishbones need to be altered i.e.lengthened to suit the rear axle track. As a matter of interest will this allow me a
greater choice of seat types and has anyone sourced a windscreen set up for this that can be fitted after the sva. I still can't decide which
one to build guys i want the room but not necessarily the hastle of sourcing one off parts.
|
|
|
|
|
britishtrident
|
| posted on 29/1/05 at 06:54 PM |
|
|
It seems a lot of Capri axle are only 2 inches wider than an Escort, some Capri axles are 4 inches wider as are MK3+ Cortina.
For suitable wishbones see GTS, MNR and MK websites.
|
|
|
omega 24 v6
|
| posted on 29/1/05 at 11:03 PM |
|
|
Sh*t i thought i had it sussed. I still reckon that 442 may be the way to go as it would allow a chice of seats and all of the engine options i have
considered. You could be right about the capri axle as i have just measured a half shaft and its only 1" longer than the escort one.
|
|
|
dozracing
|
| posted on 31/1/05 at 08:21 PM |
|
|
If you look in the GTS section of the forum you'll see a discussion about some off the shelf wide bodywork we are now doing for the McSorley
builds.
Everything from wishbones to dedion axles are also available too.
Kind regards,
Darren
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
omega 24 v6
|
| posted on 31/1/05 at 10:15 PM |
|
|
cheers darren
|
|
|
