wanderinstar
|
| posted on 30/1/05 at 05:41 PM |
|
|
sierra rear suspension
If you use Sierra as donor can you use Sierra rear axle crossmember,lower suspension arms springs and shockers?
Wanderinstar.
|
|
|
|
|
undecided
|
| posted on 30/1/05 at 05:46 PM |
|
|
It would be a tad heavy not too mention look crap
|
|
|
JoelP
|
| posted on 30/1/05 at 06:04 PM |
|
|
the springs are far too powerful for such a light car, and the pick up points arent ideal for either the springs or shockers.
i have used the rear subframe and trailing arms, with brackets welded on for gts shocks. Whilst it has saved me some time, i would strongly advise
others not to bother - it weighs a crapload, and is quite wide (hard to cover by bodywork).
much better (more satisfying) to make a 'proper' backend. 
[Edited on 30/1/05 by JoelP]
|
|
|
blueshift
|
| posted on 31/1/05 at 04:58 PM |
|
|
Buy a GTS dedion kit and be done with it.
|
|
|
