rgv_stu
|
| posted on 1/11/02 at 01:32 PM |
|
|
pics of engine + box in chassis please
for a vauxhall 2.016v lump
stu16v etc, 
wish to see how high it sits, engine mounts, etc
is it possible to mount the engine at normal 7deg or is the sfi box to high??
|
|
|
|
|
Stu16v
|
| posted on 1/11/02 at 04:44 PM |
|
|
Hi mate, have pics but unfortunately not digital. You may have trouble trying to use the standard inlet manifold, it is not only the height which is
the problem, but the inlet sweeps down low beside the block, exactly where the steering column wants to go! As for mounts, luckily I had a mate who
was building a VX Westy at the same time I needed mounts, so I merely 'copied' them, using Cortina/Transit large bobbin type rubber mounts. I will
try and get some piccies scanned.
HTH Stu.
[Edited on 1/11/02 by Stu16v]
Dont just build it.....make it!
|
|
|
rgv_stu
|
| posted on 2/11/02 at 12:32 PM |
|
|
cheers
i would rather start off on stock injection tbh
and save for throttle bodies
carbs dont seem like a good idea to me
|
|
|
fastavatar.jpg){kind=avatar}
