welshy
|
| posted on 8/11/02 at 11:33 AM |
|
|
Tubing for Wishbone/ chassis MKII
How critical is it to use 19mm O/D Tubing for the wishbones/ chassis?
I can get some 21.34mm seamless st.st tubing for free with a wall thickness of, 2.77mm, 3.73mm or 4.78mm.
If i do have to use 19mm tubing i can turn it down but that will leave me with a maximum wall thickness of 2.44mm (i.e. 4.78mm -2.34mm), would this be
ok.
All comments are welcome.
Cheers
Welshy
PS I can't/ don't know where to source any 19mm o/d tubing (Leeds) that is why i am having to do it this way.
|
|
|
|
|
davef
|
| posted on 8/11/02 at 12:03 PM |
|
|
hi welshy, the od is not that critical at all,but it must be solid drawn , ie no seamed stuff. and if you can get hold of thick wall stuff all the
better. cheers davef.
|
|
|
welshy
|
| posted on 8/11/02 at 12:22 PM |
|
|
Cheers Dave,
Better go on the shopfloor with my hacksaw then.
|
|
|
