johnjulie
|
| posted on 14/8/05 at 08:17 PM |
|
|
STAINLESS ROLL BAR MANUFACTURER???
Anyone know of a company near Manchester that can make a SS roll bar, ie has bending eqpt etc.?
Cheers John
JFDI
"Just F*****G Do It"
|
|
|
|
|
Jon Ison
|
| posted on 14/8/05 at 08:23 PM |
|
|
MK as in Martin of MK engineering, (not MK sports cars) not too far away from you, J1 M18.
|
|
|
Dillinger1977
|
| posted on 14/8/05 at 08:35 PM |
|
|
mnr have a new 'bender'
http://www.locostbuilders.co.uk/viewthread.php?tid=28145
if its from north manc, it's probably an hour's drive away. (harrogate)
-Rog
|
|
|
welderman
|
| posted on 14/8/05 at 08:59 PM |
|
|
If you know what you want, i could price one up for you. Mirror Polished, stain, whatever you like. Check out my photos or even the MK Owners club
website. Mines the black one on the home page.
I live near Chorley about 20 mins from center of Mancherster.
[Edited on 14/8/05 by welderman]
http://www.mkownersclub.co.uk/about_mkownersclub.htm
[Edited on 14/8/05 by welderman]
|
|
|
Hellfire
|
| posted on 14/8/05 at 11:23 PM |
|
|
There is alsoBenson Exhausts they are in Manchester too.
|
|
|
kreb
|
| posted on 15/8/05 at 11:22 PM |
|
|
Are stainless roll bars approved for racing? Methinks they're weaker than mild steel. Worth a consideration.
|
|
|
NS Dev
|
| posted on 16/8/05 at 09:54 AM |
|
|
certainly not approved for racing
|
|
|
DEAN C.
|
| posted on 21/8/05 at 10:45 AM |
|
|
I believe both Martins and MNR's benders are the same machine.
I can vouch that on Martins machine it does not leave any swage marks at all,giving a very smooth bend with no reduction at all.
Once I've finished a project why do I start another?
|
|
|
