jk
|
| posted on 7/12/05 at 10:16 AM |
|
|
1st stage.....
After hovering about the site for a bit i've finally registered so here goes my first post....
My chassis (to start build next summer:
Would like wide/longer body, IRS and staying as close as possible to 'classic' look- high nosecone, no bonnet/scuttle bulge and curved
rollcage.
Like the look of a Viento, but it seems a bit too lardy and the idea is that it's a lightweight car isn't it?
Have the potential to make my own chassis according to Ron's book (is that "the book?" and extending it myself, but this is not
ideal just yet due to lack of time/space
Does anyone know how the other companies stack up on rigidity and weight, plus general customer service etc?
And another thing- any benefits with a round tubular chassis. If so, any designs/drawings available?
Any help appreciated
Jon
[Edited on 7/12/05 by jk]
|
|
|
|
|
Messenjah
|
| posted on 7/12/05 at 10:23 AM |
|
|
theres a +442 chassis
its 4 inches wider 4 inches longer and 2 inches taller
i think gts do the bodywork for it and i think the plans are on the mcsorley site
http://www.mcsorley.net/locost/drawings/McSorley7+442.pdf
[Edited on 7/12/05 by Messenjah]
|
|
|
CommanderAce
|
| posted on 7/12/05 at 10:23 AM |
|
|
Welcome!
Check out the McSorley plans. There are wider plans on there which you can use, it may give you some ideas.
McSorley
Enjoy
Pete
Roads? Where we're going we don't need roads!
|
|
|
donut
|
| posted on 7/12/05 at 11:20 AM |
|
|
JK, is it reallyyou?, the pop star with top pop band jamerequi (or whatever they are called....can't stand the stuff myself!!)
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
andyd
|
| posted on 7/12/05 at 01:39 PM |
|
|
Not unles Jay Kay's real name is Jon which it's not, it's Jason.
Anyway back to the point... isn't there one of the manufacturers offering a wider bodied chassis for sale these days or did I imagine that?
Round tube: Unless you build your own (which you seem to not favour) there's no benefit  However I don't believe there is much benefit
in using round tube anyway. The Cons outweigh the Pros I think you'll find like "it being a bitch to weld around as opposed to on the
flat parts of RHS".
I'm sure others will share their opinions on that anyway.
Oh and welcome!
Andy
|
|
|
