omega 24 v6
|
| posted on 19/2/06 at 10:10 PM |
|
|
tunnel height
What height has everyone made their tunnels?
The book sizes seem very high when stiched in place.
|
|
|
|
|
ned
|
| posted on 19/2/06 at 10:38 PM |
|
|
depending on how far back you get the gearbox the height is needed, especially once you get the brake/fuel lines in etc
Ned.
beware, I've got yellow skin
|
|
|
ecosse
|
| posted on 20/2/06 at 09:15 AM |
|
|
250mm from floorpan to top rail (roughly book size?)
I'm not sure I could get away with much lower at the front with the remote gearchange assembly, but there is certainly plenty clearance at the
rear, although I am using the sierra axle, so no up/down movement to worry about (hopefully   )
Cheers
Alex
|
|
|
omega 24 v6
|
| posted on 20/2/06 at 12:28 PM |
|
|
Ok so another optical illusion that's actually right.
|
|
|
Marcus
|
| posted on 20/2/06 at 01:32 PM |
|
|
I made mine an inch higher than the book. Means I can fit the gear lever remote under the tunnel top. Looks much neater.
Marcus
Marcus
Because kits are for girls!!
|
|
|
