joolsmi16
|
| posted on 21/2/06 at 10:42 PM |
|
|
U brackets
Hi all, has anyone got a diagram to show the position of the front "U" brackets for the top and bottom wishbones in a sierra hub setup?
Thanks
|
|
|
|
|
caber
|
| posted on 21/2/06 at 10:47 PM |
|
|
best way to do this is to assemble the wishbones onto the hubs and make up a rough jig with studding and tube so the wishbones are parallel then offer
this lot up to the chassis with the brackets on. Tack the brackets in place then disassemble the jig and weld up the brackets all round and they will
then be in the right position!
Caber
|
|
|
joolsmi16
|
| posted on 22/2/06 at 05:38 PM |
|
|
When do I never think that laterally!!
Thanks
|
|
|
MikeRJ
|
| posted on 25/2/06 at 09:47 PM |
|
|
quote:
Originally posted by caber
best way to do this is to assemble the wishbones onto the hubs and make up a rough jig with studding and tube so the wishbones are parallel
Except the wishbones aren't designed to be parallel!
|
|
|
