kj
|
| posted on 22/1/07 at 05:57 PM |
|
|
R rail
Can i move the R tube to the other side? Its going to get in nthe way of my exhuast or any photo's of other options to keep the strength.
Thanks
kj
|
|
|
|
|
James
|
| posted on 22/1/07 at 06:17 PM |
|
|
Do a search... this has come up about 1000 times. 
HTH,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
Marcus
|
| posted on 22/1/07 at 10:34 PM |
|
|
I don't have one at all, possibly a bit flexy, but I don't notice.
Marcus
Because kits are for girls!!
|
|
|
caber
|
| posted on 23/1/07 at 01:59 PM |
|
|
I replaced R with two short tubes going from the tunnel to about 2/3 the way along the side rails. I also did the Cymtrics mods at the front but
changed the side diagonals to pick up at the suspension bracket to give it more support. I also added two diagonals from the top rear brackets to the
engine mount to provide a more solid triangulated location for the engine and support the bracket. I found the bottom tubes deflected at the engine
mount plate with the Pinto in. I also had to move the long side brace on the exhaust side so it hits about 3" up the bulkhead not ideal
triangulation but necessary to clear the exhaust which i think is a lolocost 4 into 1 manifold.
Caber
|
|
|
